Plug in powder sampler

Characteristics:

----------------------------------------------------------------------------------------------------------------------------------

1. The sampling volume of powder particles can be adjusted. The range of sampling quantity is 0.1ml-4.0ml, increasing by 0.1ml (the sampling quantity is expressed by volume)

2. Multi point sampling at different positions of the material, and the samples obtained at each point are separated independently.

2. Material: SUS316L high quality stainless steel

3. Surface treatment: the inside and outside of the sampler are both mirror polished, without dead angle, easy to clean

4. It is suitable for sampling of powder and granule

5. Meet the requirements of GMP and FDA in pharmaceutical industry

Specifications:

----------------------------------------------------------------------------------------------------------------------------------

1. Widely used in the sampling of pharmaceutical, food, cosmetics, chemical industry and other industries

2. It is suitable for raw material inspection, and sampling in mixer

3. Material proof and operation instruction can be provided.

4. The size can be customized, and can be sterilized at high temperature (dry heat and wet heat sterilization can be used)

5. Unique design and meticulous detail treatment to ensure compliance with FDA standards

Sampling principle:

----------------------------------------------------------------------------------------------------------------------------------

1. Insert the sampler into the medium to reach the depth of sampling

2. Rotate the inner rod, open the sampling port, and the sample enters the mold

3. Rotate the inner rod and open the sampling port to obtain the first sample
4. Slide the inner rod upward 
5. Repeat the operation to obtain the second and the third sample
6. Take the sampler out of the material, and then take the sampling mold out of the sampler to get three samples in the same position